When purchasing a fish-finder is Garmin 300 or 400c the correct model correct for you?
If you are searching for a sonar fish recognizer that has all the superb features of the high-end models at a fraction of the price, then you don't have to search any farther than the Garmin 400c and Garmin 300c Fishfinders. With either of these two models, you will can ferret out all the fish - and have a great time doing it! Each of these models will work in either salt or fresh water and, although the units are very similar, they do have some slight differences, which I will outline in this product review.
While either Garmin Fishfinders work well in both lakes or oceans, the 400c is really exceptionaly strong in saltwater because of its capability to reach depths of 1500 feet with real-time accuracy. The 300c has the ability to reach an impressive 900 feet deep. The difference lies within the sonar equipment called transducers. The 300c uses a dual-beam transducer, while the 400c offers the ability to use both a dual-beam transducer or a dual-frequency transducer. Naturally, this can be confusing; let me see if I can clear it up. The dual-beam (standard for 300c) uses a cone system that you can set to send out sonar beams at either 15 or 45 degree from the boat. Primarily, this allows you to see the contours of the ocean bottom and fish that are not directly under the craft. If I could draw a picture, it would look like a cone with the pointy end starting at the bottom of the boat and the wide end on the bottom of the lake or river. The dual-frequency transducer (an optional for the 400c) sends out a single beam but has two settings: high frequency, which allows for higher resolution in deep water, and low frequency, which is suggested for shallower waters.
Each of these Garmin Fishfinder models has a 256-color, high-resolution (240 vertical by 320 horizontal pixels) screen, designed to be readable even in bright sunlight. This means an fantastic color readout that is crystal clear, making it easy to distinguish fish from debris. The 300c screen is 3.5 inches and the 400c is 4 inches. Either has a night mode, which gives outstanding readability even in low-light circumstances. And, while we're on the subject of low-light viewing, the keypad on both units is backlit making it easy to operate at night without the use of additional lighting.
Both units sports what is called, Ultrascroll. This gives you real-time sonar updates that show fish even when you are cruising across the water. No more passing by a school or fish while you are heading to your favorite fishing spot! Another fantastic feature is called whiteline, which interprets whether the bottom is hard or soft. It also allows you to tell whether the debris on the bottom is really a fish or just an old boot. Fish Symbol ID is factory issue on both Garmin 300c and 400c fish locators. This helps you to distinguish the different sizes of fish so you are not pursuing minnows instead of salmon. Also, either models come with A-Scope. This allows you to see real-time data of fish passing through the transducer beam. Both of these fabulous sonars have an auto gain feature. This automatically controls the sensitivity on the sonar depending upon the density of the water, or fish, and also has three settings to give you even more control. Either of these units also have audible alarms that can be turned on and off. They can be set to alert you of low battery power, shallow water (of any depth you choose) and, of course, the presence of fish. This means no more surprise dead batteries, no more aggravating damaged props, and hundreds more fish in the boat!
Both units have a split screen function allowing you to completely take advantage of all the instant data these fish finders offer. Data such as water temperature the water depth, water speed for river fishing, voltage readings plus a bunch of other data. On the other side of the screen, you can view moment-by-moment fish traffic, including determining large from small fish, bottom density, and even the ability to tell if fish are hovering over the bottom. Both models allow you to zoom in on targets -- both 2x and 4x. Of course, if you just want to see the fish you can simply toggle the rocker switch and the split-screen is disabled. Both models also have the automatic settings save feature. Once you have your model set the way you like it, when you moor the craft for the evening, just turn the unit off and your settings are saved.
Here is where the Garmin 400c is different from the Garmin 300c. The 400c is CANet-compatible. CANet is a communication sytem that facilitates a faster transfer rate of information. This means you can share sonar reports with other plotters in your boat making this part of your GPS Navigation system system, not just a impressive fishfinder. One satisfied customer said, "I have a Garmin GPSMap 496 and I use it in tandem with my 400c. The two units work together perfectly. Even out in the middle of the seas I can never get lost!" Another customer says "I recently bought a Garmin 400c Fishfinder and was very surprised to find it works right along with my chart plotter." Where to purchase the Garmin 300c and the Garmin 400c for the best price is Amazon.com
While either Garmin Fishfinders work well in both lakes or oceans, the 400c is really exceptionaly strong in saltwater because of its capability to reach depths of 1500 feet with real-time accuracy. The 300c has the ability to reach an impressive 900 feet deep. The difference lies within the sonar equipment called transducers. The 300c uses a dual-beam transducer, while the 400c offers the ability to use both a dual-beam transducer or a dual-frequency transducer. Naturally, this can be confusing; let me see if I can clear it up. The dual-beam (standard for 300c) uses a cone system that you can set to send out sonar beams at either 15 or 45 degree from the boat. Primarily, this allows you to see the contours of the ocean bottom and fish that are not directly under the craft. If I could draw a picture, it would look like a cone with the pointy end starting at the bottom of the boat and the wide end on the bottom of the lake or river. The dual-frequency transducer (an optional for the 400c) sends out a single beam but has two settings: high frequency, which allows for higher resolution in deep water, and low frequency, which is suggested for shallower waters.
Each of these Garmin Fishfinder models has a 256-color, high-resolution (240 vertical by 320 horizontal pixels) screen, designed to be readable even in bright sunlight. This means an fantastic color readout that is crystal clear, making it easy to distinguish fish from debris. The 300c screen is 3.5 inches and the 400c is 4 inches. Either has a night mode, which gives outstanding readability even in low-light circumstances. And, while we're on the subject of low-light viewing, the keypad on both units is backlit making it easy to operate at night without the use of additional lighting.
Both units sports what is called, Ultrascroll. This gives you real-time sonar updates that show fish even when you are cruising across the water. No more passing by a school or fish while you are heading to your favorite fishing spot! Another fantastic feature is called whiteline, which interprets whether the bottom is hard or soft. It also allows you to tell whether the debris on the bottom is really a fish or just an old boot. Fish Symbol ID is factory issue on both Garmin 300c and 400c fish locators. This helps you to distinguish the different sizes of fish so you are not pursuing minnows instead of salmon. Also, either models come with A-Scope. This allows you to see real-time data of fish passing through the transducer beam. Both of these fabulous sonars have an auto gain feature. This automatically controls the sensitivity on the sonar depending upon the density of the water, or fish, and also has three settings to give you even more control. Either of these units also have audible alarms that can be turned on and off. They can be set to alert you of low battery power, shallow water (of any depth you choose) and, of course, the presence of fish. This means no more surprise dead batteries, no more aggravating damaged props, and hundreds more fish in the boat!
Both units have a split screen function allowing you to completely take advantage of all the instant data these fish finders offer. Data such as water temperature the water depth, water speed for river fishing, voltage readings plus a bunch of other data. On the other side of the screen, you can view moment-by-moment fish traffic, including determining large from small fish, bottom density, and even the ability to tell if fish are hovering over the bottom. Both models allow you to zoom in on targets -- both 2x and 4x. Of course, if you just want to see the fish you can simply toggle the rocker switch and the split-screen is disabled. Both models also have the automatic settings save feature. Once you have your model set the way you like it, when you moor the craft for the evening, just turn the unit off and your settings are saved.
Here is where the Garmin 400c is different from the Garmin 300c. The 400c is CANet-compatible. CANet is a communication sytem that facilitates a faster transfer rate of information. This means you can share sonar reports with other plotters in your boat making this part of your GPS Navigation system system, not just a impressive fishfinder. One satisfied customer said, "I have a Garmin GPSMap 496 and I use it in tandem with my 400c. The two units work together perfectly. Even out in the middle of the seas I can never get lost!" Another customer says "I recently bought a Garmin 400c Fishfinder and was very surprised to find it works right along with my chart plotter." Where to purchase the Garmin 300c and the Garmin 400c for the best price is Amazon.com
About the Author:
Are you taking a boat ride? www.Garmin400c.net 400c Fishfinder. Here is an inexpensive 300c Fishfinder
Custom Search